1971 Chevrolet P20 Van Clutch Flywheel Parts

Choose your Submodel for your 1971 Chevrolet P20 Van

Showing 1 - 5 of 5 products

Sort:

Show:

Image

SKU

Product

Rating

Price

steel flywheel
168 Teeth; Zero Balance
Steel flywheel Chevy 1955-85/262-427/0 bal./168T
Steel Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1971 - Chevrolet P20 Van	V	-	8 Cyl 5.7L	350

3 In Stock

$417.05 CAD

$500.46 CAD

steel flywheel
153 Teeth; 10.5 B/B And Diaphragm
Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
Steel Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1971 - Chevrolet P20 Van	V	-	8 Cyl 5.7L	350

2 In Stock

$388.41 CAD

$466.09 CAD

aluminum flywheel
0 Balance; 168 Teeth
Aluminum flywheel Chevy 1955-85/262-427/0 bal./168T
Aluminum Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- .250 in. Thick Steel Friction Insert
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1971 - Chevrolet P20 Van	V	-	8 Cyl 5.7L	350

1 In Stock

$593.98 CAD

$712.78 CAD

Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 30 lbs.
Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 30 lbs.
Product Attributes:
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Tooth Quantity: 168
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Crankshaft Bolt Hole Quantity: 6
- Engine 2: 1970-1990 Bbc 2pc Seal (large Register)
- Weight: 30 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Make: Chevrolet
- Additional Counter Weight Kit Required: 560222
Features:
- McLeod Racing Billet Steel flywheels is the best choice for customers that want a dependable good quality steel flywheel. Made from Billet steel the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.

Additional Fitment Information:

Vehicle	Block	CC	Region	Engine	Sub Model	CID
1971 - Chevrolet P20 Van	V	-	United States	8 Cyl 5.7L	Base	350

Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 22 lbs.
Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 22 lbs.
Product Attributes:
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Tooth Quantity: 168
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Crankshaft Bolt Hole Quantity: 6
- Engine 2: 1970-1990 Bbc 2pc Seal (large Register)
- Weight: 22 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Make: Chevrolet
- Additional Counter Weight Kit Required: 560222
Features:
- McLeod Racing Billet Steel flywheels is the best choice for customers that want a dependable good quality steel flywheel. Made from Billet steel the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.